⚡ TL;DR — Quick Answer

Check that the 🫧 Tassimo power cord is firmly seated in both the machine and wall outlet.

What Causes Coffee Grounds In Cup?

Tassimo machines use barcode-scanned capsules for precise brewing parameters.

Step-by-Step Fix

Follow these steps specifically for Tassimo machines:

  1. Check that the 🫧 Tassimo power cord is firmly seated in both the machine and wall outlet.
  2. Test the outlet with another device. If the outlet has power, inspect the Tassimo power switch for damage.
  3. Perform a hard reset: unplug the Tassimo machine for 60 seconds, then reconnect. This clears temporary control board faults.
  4. If still dead, the internal thermal fuse or power supply module may need replacement. Contact Tassimo service.

Tassimo Pro Tip

Expert advice: If the machine reads the barcode incorrectly, clean the scanner window with a dry cloth.

Model-Specific Notes

These steps apply to: Tassimo T12, Tassimo T20, Tassimo T55, Tassimo T65, Tassimo My Way. For exact part numbers, consult the Tassimo parts catalog at Tassimo Support.

Preventive Maintenance

Run the Tassimo descaling program every 2-3 months.

Popular Tassimo Models

When to Call a Professional

If these steps don't resolve the issue, contact an authorized Tassimo service center. Complex electrical or hydraulic problems require professional diagnosis.

Frequently Asked Questions

Grounds in the cup almost always mean a damaged or misaligned brew basket or filter. A Tassimo grinder that stops usually has beans jammed in the burrs, an empty-hopper sensor triggered, or worn burrs. Empty and brush the hopper, run a few dry beans through, and never force the motor. Detailed steps in our Coffee Grounds In Cup guide.

When the grinder on a Tassimo stalls, the first suspects are jammed beans and the hopper sensor. Clear the burrs with a brush, refill the hopper, and run a short grind. If it still stops, the burrs or drive gear may be worn — see our Coffee Grounds In Cup guide.

A silent Tassimo grinder is most often a jam or a tripped safety switch. Unplug, remove the hopper, brush the burrs clean, and try again with a small amount of beans. Persistent failure points to the gear or motor — repair steps in our Coffee Grounds In Cup guide.