⚡ TL;DR — Quick Answer

Verify the water tank on your Tassimo is filled above the MIN line and seated correctly.

What Causes Not Brewing?

Tassimo machines use barcode-scanned capsules for precise brewing parameters.

Step-by-Step Fix

Follow these steps specifically for Tassimo machines:

  1. Verify the water tank on your Tassimo is filled above the MIN line and seated correctly.
  2. Remove the brew group from the Tassimo and clean under running water. Coffee oil buildup is a common cause.
  3. Check the grinder chute for blockage. On Tassimo machines, a full dregs container can prevent brewing.
  4. Prime the system by running a rinse cycle without coffee. Air bubbles in the pump can stop flow.

Tassimo Pro Tip

Expert advice: If the machine reads the barcode incorrectly, clean the scanner window with a dry cloth.

Model-Specific Notes

These steps apply to: Tassimo T12, Tassimo T20, Tassimo T55, Tassimo T65, Tassimo My Way. For exact part numbers, consult the Tassimo parts catalog at Tassimo Support.

Preventive Maintenance

Run the Tassimo descaling program every 2-3 months.

Popular Tassimo Models

When to Call a Professional

If these steps don't resolve the issue, contact an authorized Tassimo service center. Complex electrical or hydraulic problems require professional diagnosis.

Frequently Asked Questions

A machine that runs but delivers no coffee has either a blocked brew path or a faulty brew valve. If no water comes out of your Tassimo machine, the tank may be mis-seated, there may be air in the circuit, or the pump inlet is blocked by scale. Reseat the tank, run a blank cycle to purge air, and descale if flow stays weak. See our Not Brewing guide.

No-flow on a Tassimo is usually one of three: the tank is not seated properly, air is trapped in the pump, or scale is blocking the inlet. Remove and refit the tank, run a rinse cycle, and descale if it persists. Full troubleshooting in our Not Brewing guide.

A Tassimo that runs but moves no water has a flow blockage or an air lock. Start with the tank seal and a blank brew to push air through, then check the inlet filter for scale. If flow is still zero, our Not Brewing guide covers pump and valve repairs.