Mr Coffee coffee machine Troubleshooting

Mr Coffee Coffee Machine Not Turning On

Expert guide to diagnose and fix "not turning on" on Mr Coffee machines.

⚡ TL;DR — Quick Answer

Check that the 🏠 Mr Coffee power cord is firmly seated in both the machine and wall outlet.

What Causes Not Turning On?

Mr. Coffee machines are affordable drip brewers with simple mechanical components.

Step-by-Step Fix

Follow these steps specifically for Mr Coffee machines:

  1. Check that the 🏠 Mr Coffee power cord is firmly seated in both the machine and wall outlet.
  2. Test the outlet with another device. If the outlet has power, inspect the Mr Coffee power switch for damage.
  3. Perform a hard reset: unplug the Mr Coffee machine for 60 seconds, then reconnect. This clears temporary control board faults.
  4. If still dead, the internal thermal fuse or power supply module may need replacement. Contact Mr Coffee service.

Mr Coffee Pro Tip

Expert advice: If the machine brews slowly, check the spray head for mineral deposits blocking water flow.

Model-Specific Notes

These steps apply to: Mr. Coffee 12-Cup, Mr. Coffee Café Barista, Mr. Coffee DR series, Mr. Coffee BVMC, Mr. Coffee EM600. For exact part numbers, consult the Mr Coffee parts catalog at Mr Coffee Support.

Preventive Maintenance

Run a vinegar cycle monthly to remove hard water deposits.

Popular Mr Coffee Models

Mr. Coffee 12-Cup Mr. Coffee Café Barista Mr. Coffee DR series Mr. Coffee BVMC Mr. Coffee EM600

When to Call a Professional

If these steps don't resolve the issue, contact an authorized Mr Coffee service center. Complex electrical or hydraulic problems require professional diagnosis.

Related Mr Coffee Issues

Not Turning On Not Heating Error Codes Leaking Water Ver versión en español

Other Brands

Nespresso Keurig DeLonghi

See Also

Related issues on Mr Coffee:

Not HeatingNo Water FlowError Code Flashing

Frequently Asked Questions

A completely dead machine is most often the power supply, thermal fuse, or a bad connection. When a Mr. Coffee machine won't turn on, check the outlet, the power cord, and the switch first. Unplug it for 60 seconds and retry — this clears most temporary control-board faults. If it stays dead, the thermal fuse or power supply may need replacing; see our Not Turning On guide.

A Mr. Coffee that is completely dead usually has a power problem: a tripped breaker, a damaged cord, or a blown thermal fuse. Unplug for a minute, test another outlet, and inspect the cord. If nothing helps, our Not Turning On guide walks through the internal checks.

Start simple with a Mr. Coffee that will not power up: confirm the outlet works, the cord is undamaged, and the switch is on. Then do a 60-second unplug reset. Dead machines that ignore all of this usually need a fuse or power-board repair — steps in our Not Turning On guide.

Before opening a dead Mr. Coffee, eliminate the basics: outlet, cord, switch, and a full unplug reset. Most temporary faults clear this way. If it stays off, the power supply or thermal fuse is the likely culprit — see our Not Turning On guide for the repair guide.